which ECU for K24a2 swap

Post Reply
crxrich_kid
Posts: 1
Joined: Fri Jan 04, 2019 6:28 pm

which ECU for K24a2 swap

Post by crxrich_kid »

I'm putting a k24a2 into a 93 Civic Hatch. If I use an Element harness and 2005 Accord ECU, can that Accord ECU be reflashed to properly run a basically stock k24a2. Or, is it possible to have the 2006 TSX automatic ECU reflashed (or would it not work with Element harness)? I want the immobilizer disabled and most importantly, this is a budget build. So only basic components to get it running will be added...... cable TB, kswap header etc.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: which ECU for K24a2 swap

Post by KTuner »

2005 Accord ECUs do not have a CEL output. It will work if you don't care about CEL. You'd be better off getting a KTunerSWAP ECU or PRB. There's a basemap for the TSX engine using PRB codebase right in the software.
Post Reply

Return to “KTuner Reflash”