Ktuner cycles between connected and disconnected
Ktuner cycles between connected and disconnected
I've got a Ktuner V1.2 and have successfully flashed the stage 2 file to my ECU (Honda Accord 2.0t 10at). When trying to go back and upload file changes to the car, the Ktuner now just cycles between connected and disconnected and will not allow me to upload a new file (upload bar not highlighted). I also am not able to activate any sort of logging parameters while driving. This is very frustrating.
Re: Ktuner cycles between connected and disconnected
If it's still plugged into the vehicle the unit does go to sleep without ECU activity. Plug it in fresh or key on so it wakes up. The LED indicates everything you need to know about the status. Contact support by email if you still can't figure it out.
Re: Ktuner cycles between connected and disconnected
It's not going to sleep. It's never connecting. It says connected for a second then switches between connected and disconnected ad infinitum.. Doesn't matter if I've just plugged it in or not.
Re: Ktuner cycles between connected and disconnected
No mention of whether it's still plugged into the vehicle at that point or what the LED does. Feel free to reach out to support via email and include those details. Info@KTuner.com
-
- Posts: 5
- Joined: Mon Aug 13, 2018 1:43 pm
Re: Ktuner cycles between connected and disconnected
Did your issue get fixed?
Re: Ktuner cycles between connected and disconnected
It was asleep.