base maps

base maps

Postby EAFOURLIFE » Sun Jun 10, 2018 3:37 am

will there be any new/ updated base maps released for this platform? example would be set ups with different intakes, like ktuned, prl, aquity etc. or a "stage 2" tune for cars with a downpipe. or is this considered a dead platform as the 10th gen civics are the latest thing.
just curious because i purchased the ktuner over flashpro as a cheaper alternative because with my ktuned intake i was throwing lean codes and after the tune 1 map provided it then threw rich codes and has slight driveability problems of it surging at moderate throttle input and dont have money or the time to get a road tune or dyno tune. i was very dissapointed to find that there wasnt more base maps.

also what would the harm be if i ran the speed density without further tuning to disable the maf sensor all together. what tables would require adjustment to make the car run smoothly on that?
EAFOURLIFE
 
Posts: 1
Joined: Sun Jun 10, 2018 3:26 am

Re: base maps

Postby KTuner » Mon Jun 11, 2018 12:44 pm

Not one intake manufacturer designed an intake that works with the factory MAF system. We have no plans to create basemaps for all of the various intakes out there. You can use speed density and work with a tuner. I'd suggest Derek at Innovative Motorworks or Kenny at TurbogixxerTuning.com

You may need to adjust fueling as necessary, depending on your mods.
KTuner
Site Admin
 
Posts: 1186
Joined: Mon Jul 22, 2013 8:13 pm


Return to 12-15 Civic Si Specific

Who is online

Users browsing this forum: No registered users and 0 guests

cron