Auto On when car is started.

Questions about your KTunerFlash V2 Hardware

Auto On when car is started.

Postby DAV0320 » Wed May 23, 2018 12:38 pm

I see the V2 unit powers off automatically ~15-20 seconds after shutting the car off. But I notice it does not turn back on automatically when the car is started without unplugging and plugging it back in. Is this right, or is there a setting I missed during initial set up?
DAV0320
 
Posts: 5
Joined: Sun May 20, 2018 7:01 pm

Re: Auto On when car is started.

Postby KTuner » Wed May 23, 2018 4:02 pm

Screen goes off at 20 seconds. Unit goes to sleep at 2 minutes. You must have an 18 accord? They added a gateway which prevents CAN data from waking the unit and the next firmware update will keep the unit in a lighter sleep mode for 18 Accord models.
KTuner
Site Admin
 
Posts: 1281
Joined: Mon Jul 22, 2013 8:13 pm

Re: Auto On when car is started.

Postby DAV0320 » Wed May 23, 2018 4:08 pm

Yessir, 2018 Accord.
Good to hear an update will help with that. I imagine that will simply require an update to my current V2 through PC or laptop?
Out of curiosity, is there a timeline when the update will roll out?
DAV0320
 
Posts: 5
Joined: Sun May 20, 2018 7:01 pm

Re: Auto On when car is started.

Postby KTuner » Wed May 23, 2018 4:16 pm

Yessir, the software will ask you to update when connected.

Looking for this week, but also working on additional firmware changes that may hold that up. Hang in there!
KTuner
Site Admin
 
Posts: 1281
Joined: Mon Jul 22, 2013 8:13 pm

Re: Auto On when car is started.

Postby DAV0320 » Wed May 23, 2018 4:53 pm

right on!
DAV0320
 
Posts: 5
Joined: Sun May 20, 2018 7:01 pm


Return to KTunerFlash V2 Specific

Who is online

Users browsing this forum: No registered users and 1 guest