Boost?

Re: Boost?

Postby Ken » Wed May 16, 2018 3:50 pm

Nope, not bad. Still, down the road it'll need proper injector sizing and other features.

Anything off the top of your head I should adjust now?
Ken
 
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Postby KTuner » Wed May 16, 2018 3:57 pm

What codes are coming up occasionally?
KTuner
Site Admin
 
Posts: 1286
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boost?

Postby Ken » Wed May 16, 2018 5:27 pm

P2227 for barometric pressure, likely because of the MAF

This happens if i step on the throttle, especially on a hill. I can reset quickly and sometimes drive a couple hundred miles without a CEL.
Ken
 
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Postby KTuner » Wed May 16, 2018 6:02 pm

I'll take a look and see what's available.
KTuner
Site Admin
 
Posts: 1286
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boost?

Postby Ken » Sun May 20, 2018 8:44 pm

Thank you! :mrgreen:
Ken
 
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Postby Ken » Fri May 25, 2018 5:25 pm

Any further thoughts?
Ken
 
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Postby KTuner » Fri May 25, 2018 8:13 pm

I will be looking into full mapping of disables for these shortly. We don't have this disable on other CR-Zs and have not had anyone report the error. There is no quick change... it's never been necessary.
KTuner
Site Admin
 
Posts: 1286
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boost?

Postby Ken » Sat May 26, 2018 4:22 am

Thanks again for the response. Hoping boost tables and other little goodies will be a thing soon! :)
Ken
 
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Postby Ken » Sat May 26, 2018 5:13 am

Would it make any sense to compare someone else's ignition tables, MAF scaling etc and enter those values? Assuming of course the same injectors and same turbo.

Also I'm going to buy an AEM MAP sensor thats compatible with the CR-Z. Maybe that'll prevent some of the barometric errors.
Ken
 
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Postby Ken » Wed Jun 20, 2018 3:36 am

Update:

I'm moving to Gilbert this next month, so if you ever need the CR-Z for testing purposes, happy to help. I also have a '17 Accord V6 and '06 S2000.
Ken
 
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

PreviousNext

Return to CR-Z Platform

Who is online

Users browsing this forum: No registered users and 0 guests