Vehicle wiring for full functionality

Questions about your KTunerFlash V2 Hardware

Vehicle wiring for full functionality

Postby Bajaking6065 » Wed Oct 30, 2019 11:35 pm

Does the Vehicle that the ktuner being plugged into need the CANN system functional?

Im looking for a tuning solution for my Frankenstein J series currently running in my 1960 VW Baja. The setup is a J35a1 bottem end, J32a2 heads, J32a3 intake manifold, run by a 2006 TL base M/T ECU. The DLC works with no issue but the CANN system functions are not. I've logged nearly 11,000 miles in the car and I want more power. I'm not running the TL gauge cluster where the CANN system computer or multi function complex takes place. I want to go forced Induction once I can find a tuner that works with tuning my current setup.
Bajaking6065
 
Posts: 2
Joined: Wed Oct 30, 2019 11:19 pm

Re: Vehicle wiring for full functionality

Postby KTuner » Thu Oct 31, 2019 3:29 pm

2006 TL is not listed as an application we support.
KTuner
Site Admin
 
Posts: 1994
Joined: Mon Jul 22, 2013 8:13 pm

Re: Vehicle wiring for full functionality

Postby Bajaking6065 » Sun Nov 03, 2019 10:00 am

I knew that, I failed to mention that I have a 2008 TL auto ECU and harness that I can easily swap into the car. But I can't get around the automatic trans......ECU limits rpm to 5000 and no VTEC.
Bajaking6065
 
Posts: 2
Joined: Wed Oct 30, 2019 11:19 pm

Re: Vehicle wiring for full functionality

Postby KTuner » Sun Nov 03, 2019 1:01 pm

Send an email in with the ECU number and we'll see if it's possible to flash it with MT.
KTuner
Site Admin
 
Posts: 1994
Joined: Mon Jul 22, 2013 8:13 pm


Return to KTunerFlash V2 Specific

Who is online

Users browsing this forum: No registered users and 0 guests