Error codes wont go away. Car is in limp mode please help!!!

Error codes wont go away. Car is in limp mode please help!!!

Postby cowboy9299 » Fri Sep 13, 2019 9:50 pm

I have a 2016 civic ex turbo. Went through all the steps. Just uploaded the dual psi tune. Said flash was successful but error codes didnt go away putting the car into limp mode not allowing the engine to rev past 2500 rpm.
cowboy9299
 
Posts: 4
Joined: Fri Sep 13, 2019 9:44 pm

Re: Error codes wont go away. Car is in limp mode please hel

Postby KTuner » Sat Sep 14, 2019 12:34 pm

Check the error codes, which you can do in the KTuner software via the toolbar. Then proceed to fix the issue outlined by the error codes. If you have a U0301 code then you chose the wrong codebase to start from in File>New Tune. The description for those selections outlined you should have matched yours in Tools>KTuner Unit Info before flashing. Choose the other one that you didn't choose last time if that's the case.
KTuner
Site Admin
 
Posts: 1917
Joined: Mon Jul 22, 2013 8:13 pm

Re: Error codes wont go away. Car is in limp mode please hel

Postby cowboy9299 » Sun Sep 15, 2019 12:45 am

KTuner wrote:Check the error codes, which you can do in the KTuner software via the toolbar. Then proceed to fix the issue outlined by the error codes. If you have a U0301 code then you chose the wrong codebase to start from in File>New Tune. The description for those selections outlined you should have matched yours in Tools>KTuner Unit Info before flashing. Choose the other one that you didn't choose last time if that's the case.


Giving the code U0038 what should I do?
cowboy9299
 
Posts: 4
Joined: Fri Sep 13, 2019 9:44 pm

Re: Error codes wont go away. Car is in limp mode please hel

Postby KTuner » Sun Sep 15, 2019 1:06 pm

Clear codes. That code wouldn't cause limp mode.
KTuner
Site Admin
 
Posts: 1917
Joined: Mon Jul 22, 2013 8:13 pm

Re: Error codes wont go away. Car is in limp mode please hel

Postby cowboy9299 » Mon Sep 16, 2019 6:20 pm

Tcm failed dont know if the ktuner caused it but that part is expensive.
cowboy9299
 
Posts: 4
Joined: Fri Sep 13, 2019 9:44 pm

Re: Error codes wont go away. Car is in limp mode please hel

Postby KTuner » Mon Sep 16, 2019 6:40 pm

We don't communicate, flash, or have anything to do with the TCM. The vehicle wouldn't drive without a minimally operational TCM.
KTuner
Site Admin
 
Posts: 1917
Joined: Mon Jul 22, 2013 8:13 pm

Re: Error codes wont go away. Car is in limp mode please hel

Postby cowboy9299 » Mon Sep 16, 2019 6:45 pm

Thanks anyway think it's a common problem I'll have to deal with
cowboy9299
 
Posts: 4
Joined: Fri Sep 13, 2019 9:44 pm

Re: Error codes wont go away. Car is in limp mode please hel

Postby KTuner » Mon Sep 16, 2019 7:12 pm

Definitely not common or you'd see much more talk about the TCM from the community.
KTuner
Site Admin
 
Posts: 1917
Joined: Mon Jul 22, 2013 8:13 pm


Return to KTunerFlash V1.2 Specific Questions

Who is online

Users browsing this forum: No registered users and 0 guests