1990 Honda civic
Phanetric conversion harness brand new
Ktuner jumper harness 02/04 -05/06
02/04 ecu and engine harness
On connector E pin 9 ign1
When I turn the key to on wire got so hot it melted the plastic around wire I cut the power as soon as I noticed .
I'm stumped emailing the conversion harness maker he stated the wire must be grounding out in between the jumper .
02/04 ecu /Ktunerjumper harness/90 civic wiring issue
02/04 ecu /Ktunerjumper harness/90 civic wiring issue
Last edited by k20ef_ on Mon May 25, 2015 11:18 pm, edited 2 times in total.
Re: 02/04 ecu /ktuner jumper harness/90 civic wiring issue
This is what the guy said who makes the conversio harness
I cross reference both ecu years and the wire is doing what it needs to do.the jumper harness is grounding out when not needed.someone please help my cars ready to start and I just need to get this resolved .
I cross reference both ecu years and the wire is doing what it needs to do.the jumper harness is grounding out when not needed.someone please help my cars ready to start and I just need to get this resolved .
Re: 02/04 ecu /Ktunerjumper harness/90 civic wiring issue
If you have an 02-04 ECU then the harness was never necessary.k20ef_ wrote: Ktuner jumper harness 02/04 -05/06
02/04 ecu and engine harness
Re: 02/04 ecu /Ktunerjumper harness/90 civic wiring issue
Correction I have a 05-06 ecu from ktuner the end user kit
Re: 02/04 ecu /Ktunerjumper harness/90 civic wiring issue
KTuner wrote:If you have an 02-04 ECU then the harness was never necessary.k20ef_ wrote: Ktuner jumper harness 02/04 -05/06
02/04 ecu and engine harness
Correction 05-06 ecu
Re: 02/04 ecu /Ktunerjumper harness/90 civic wiring issue
Speak to the harness manufacturer again. If the pinouts are correct then you know it's something external from the harness itself. I'm not sure what else I can do to help here.
Re: 02/04 ecu /Ktunerjumper harness/90 civic wiring issue
Who ever make the jumpers please please please label the e plug as there is two exact plugs I swapped them around mistake I've got it working now .can anyone help me out on my wideband its a mtx -l made by innovative .i have a yellow 0v or brown 1.1v analog output .which do I use for the ecu? And what do I pin to I would like to use as my primary O2 .
Re: 02/04 ecu /Ktunerjumper harness/90 civic wiring issue
The harness is straight through. It only plugs in one way on the female side so there should be no confusion on the male side. If you think they should label it, please let them know. I've already suggested the same.
You can use your wideband for logging purposes by wiring the analog input to one of the available inputs found in preferences under the wideband section.
You can use your wideband for logging purposes by wiring the analog input to one of the available inputs found in preferences under the wideband section.
-
- Posts: 2
- Joined: Mon Feb 15, 2016 8:15 pm
- Location: Tajikistan
- Contact:
02/04 ecu /Ktunerjumper harness/90 civic wiring issue
Any help finding a a harness looking for pwr mirror, locks, windows. And ecu