Rev limit and Vtec engagement

Ask your general questions about KTuner
Post Reply
Delmecodavis
Posts: 3
Joined: Wed Aug 22, 2018 2:55 pm

Rev limit and Vtec engagement

Post by Delmecodavis »

03 Rsx hits a “rev limit” around 6k rpm. I’m running reflash #2 with stock parameters so I can’t put a finger on why it won’t rev past 6k under load. All settings are exactly how they came except disabling the immobilizer. Stock ecu still hits vtec and flashing/ changing every parameter in the software is excellent with no errors.
Delmecodavis
Posts: 3
Joined: Wed Aug 22, 2018 2:55 pm

Re: Rev limit and Vtec engagement

Post by Delmecodavis »

03 rsx type s
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Rev limit and Vtec engagement

Post by KTuner »

Sounds like it's breaking up, rather than a rev limit, unless you have low rev limit set to 6000 and you aren't seeing vehicle speed in the software. Perhaps you didn't enable 02-04 Transmission checkbox?
Delmecodavis
Posts: 3
Joined: Wed Aug 22, 2018 2:55 pm

Re: Rev limit and Vtec engagement

Post by Delmecodavis »

Thanks for the response. After I posted I found that setting and fixed the problem. It really scared me haha but we’re all good now.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Rev limit and Vtec engagement

Post by KTuner »

Good news there! No problem.
Post Reply

Return to “General Questions”