Adjustable 2 step

daje00
Posts: 52
Joined: Tue Jul 23, 2013 11:36 am

Re: Adjustable 2 step

Post by daje00 »

So i attempted to try the adjustable 2 step again. I downloaded my base-code and activated the adj 2 step. It worked fine the as soon as i turned the car off and on again it stopped working. It actually seemed like it had no rev limit at all. It went over 7k then i released the pedal. I had the 2 step set at 4k min with 60% throttle at 0 mph. I downloaded the base-code and checked to see if the adj 2 step was unchecked but it wasn't. It was still the same as when i uploaded it. See my link below to get the data-logs of it working and not working. Any help on this would be appreciated. As you can see I along with others have been having issues with the adjustable 2 step. Any help or advice is greatly appreciated. Thanks

https://drive.google.com/open?id=1k5hsr ... DojMMrsBtC
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Adjustable 2 step

Post by KTuner »

If you enable it with the laptop connected and it works this is because it was uploaded in real-time, as it says live settings when connected. If you then upload to the ECU and it doesn't work this would be news to me.
daje00
Posts: 52
Joined: Tue Jul 23, 2013 11:36 am

Re: Adjustable 2 step

Post by daje00 »

Yes, it works while the laptop is connected and after i upload and disconnect the laptop but once i shut the car off and then restart it, it no longer works. When i download the map the settings still show adjustable 2 step is enabled. I attached the datalogs , maybe you can see something that's causing the issue. The only difference between the two datalogs is that the car was turned off and then started back up. I can make a video of it if you want.
daje00
Posts: 52
Joined: Tue Jul 23, 2013 11:36 am

Re: Adjustable 2 step

Post by daje00 »

Any idea what's causing this?
daje00
Posts: 52
Joined: Tue Jul 23, 2013 11:36 am

Re: Adjustable 2 step

Post by daje00 »

Ktuner administrator, any thoughts?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Adjustable 2 step

Post by KTuner »

Nothing found so far.
daje00
Posts: 52
Joined: Tue Jul 23, 2013 11:36 am

Re: Adjustable 2 step

Post by daje00 »

Were you able to take a look at my datalogs?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Adjustable 2 step

Post by KTuner »

Datalogs aren't useful. I'm going through the code.
daje00
Posts: 52
Joined: Tue Jul 23, 2013 11:36 am

Re: Adjustable 2 step

Post by daje00 »

Hi, did you find anything that could be causing the issue?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Adjustable 2 step

Post by KTuner »

We've not found anything regarding this issue so far.
Post Reply

Return to “05-06 RSX Specific”