Boost?

Ken
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Post by Ken »

Nope, not bad. Still, down the road it'll need proper injector sizing and other features.

Anything off the top of your head I should adjust now?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boost?

Post by KTuner »

What codes are coming up occasionally?
Ken
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Post by Ken »

P2227 for barometric pressure, likely because of the MAF

This happens if i step on the throttle, especially on a hill. I can reset quickly and sometimes drive a couple hundred miles without a CEL.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boost?

Post by KTuner »

I'll take a look and see what's available.
Ken
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Post by Ken »

Thank you! :mrgreen:
Ken
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Post by Ken »

Any further thoughts?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boost?

Post by KTuner »

I will be looking into full mapping of disables for these shortly. We don't have this disable on other CR-Zs and have not had anyone report the error. There is no quick change... it's never been necessary.
Ken
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Post by Ken »

Thanks again for the response. Hoping boost tables and other little goodies will be a thing soon! :)
Ken
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Post by Ken »

Would it make any sense to compare someone else's ignition tables, MAF scaling etc and enter those values? Assuming of course the same injectors and same turbo.

Also I'm going to buy an AEM MAP sensor thats compatible with the CR-Z. Maybe that'll prevent some of the barometric errors.
Ken
Posts: 27
Joined: Wed Jul 06, 2016 6:01 am

Re: Boost?

Post by Ken »

Update:

I'm moving to Gilbert this next month, so if you ever need the CR-Z for testing purposes, happy to help. I also have a '17 Accord V6 and '06 S2000.
Post Reply

Return to “CR-Z Platform”