VTC not commanding or functioning.

Post Reply
78si
Posts: 6
Joined: Thu Aug 31, 2017 2:48 pm

VTC not commanding or functioning.

Post by 78si »

I had my 07 manual trans element on the Dyno today. The tuners stated that the VTC was not commanding/functioning properly. I have a TSX K24A2 engine. Do you have any ideas why I'm having a problem? They stated it its asking for VTC but its not outputting it, then it gives up asking... Hopefully that made sense to you. I bought the ktuner from speedfactory, but i'm in Canada at a local dyno shop. Thanks for any guidance.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: VTC not commanding or functioning.

Post by KTuner »

As your info would suggest, you have a mechanical or wiring related issue.
78si
Posts: 6
Joined: Thu Aug 31, 2017 2:48 pm

Re: VTC not commanding or functioning.

Post by 78si »

Late update! I bought the element with a noisy engine. I’m guessing someone nuked the vtc circuit when they were diagnosing it. Anyway.. New ecu and with the ktuner is working great.
Thanks
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: VTC not commanding or functioning.

Post by KTuner »

That is good news.
Post Reply

Return to “07-08 Element Specific”