Ask your KTuner Reflash questions

KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Post by KTuner »

Sounds good.
vctaillon
Posts: 22
Joined: Mon Oct 09, 2017 2:25 am

quick 2 questions on provided tunes in End User Kit....

Post by vctaillon »

:D
quick 2 questions on provided tunes in End User Kit....

the descriptions are pretty clear just wondering what's the raw performance difference between "Stage 0, 1, 2" and "Starter 16.5, 18, 21 PSI" ? Starter is improved launching only ? Seems and I'm guessing here :lol: "Stage 0, 1, 2" is written out with more refined raw performance and the other might be scaled back a bit. I guess I'd have to try them all to see, feel etc......
:roll:

And is there a way to see the breakdown of each reflash tune and see what it does ?

I just jumped right in and got Stage 1 installed on 17 EXT HB CVT and it's turned up quite a bit from stock for now ;).
Last edited by vctaillon on Mon Oct 09, 2017 11:42 pm, edited 1 time in total.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Post by KTuner »

Starters leave all adjustment level options, like turbo responsiveness and spool, up to you.
vctaillon
Posts: 22
Joined: Mon Oct 09, 2017 2:25 am

Re: Ask your KTuner Reflash questions

Post by vctaillon »

KTuner wrote:Starters leave all adjustment level options, like turbo responsiveness and spool, up to you.
so you open up the tune and you can change settings but you have to have "saved as" first...
I guess I'm not clear on the edit tune procedure.

OK, so is there a way I can "see" the adjustment options for instance on my current stage 1 tune even if I didn't save it first ?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Post by KTuner »

You can edit any open tune. You should save a copy, but that's on you.

You can't see the staged tunes.
hylander
Posts: 1
Joined: Tue Oct 31, 2017 8:11 pm

Re: Ask your KTuner Reflash questions

Post by hylander »

Once I order my end user rev 1 Ktuner for '05 RSX Type S with reflash 1 on it, are the other reflashes, #2, and #3 readily available in the software to locate and reflash the ECU? And, once I have a PLM race header and Skunk2 KPRO Series Intake manifold 70 mm port with matching throttle body, will the vehicle run better with reflash #2 , or #3, since it is not an RBC Intake manifold. If #2 is the better choice, how do I obtain a basemap for the aforementioned bolt ons to optimize best performance? Thanks.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Post by KTuner »

All of our basemaps are built into the software as outlined in our tutorial videos.
JPool
Posts: 1
Joined: Tue Nov 28, 2017 11:25 pm

Re: Ask your KTuner Reflash questions

Post by JPool »

Is reflash #2 supposed to be used with race headers or shorty headers?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ask your KTuner Reflash questions

Post by KTuner »

A header which increases exhaust flow should be used.
thejackal1963
Posts: 1
Joined: Sat Jul 28, 2018 6:04 pm

Re: Ask your KTuner Reflash questions

Post by thejackal1963 »

hello i am new to this forum, i have a 2018 honda crv ex-l with a 1.5l turbo , will the v2 work with this model? thank you
Post Reply

Return to “KTuner Reflash”