08 A/T element

Hany
Posts: 28
Joined: Sat Oct 07, 2017 2:56 am

08 A/T element

Post by Hany »

just wanted to know if my 08 element A/T is fully supported by V2 ?
is there an easy way to figure out which ecu i have in mine without having to physically remove it ?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: 08 A/T element

Post by KTuner »

AT support is in the queue to be added.
Hany
Posts: 28
Joined: Sat Oct 07, 2017 2:56 am

Re: 08 A/T element

Post by Hany »

Any idea when?
Im working on a turbo project and the only thing that's holding me back is fuel management
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: 08 A/T element

Post by KTuner »

Even when basic functionality is added it won't support forced induction.
Hany
Posts: 28
Joined: Sat Oct 07, 2017 2:56 am

Re: 08 A/T element

Post by Hany »

why won't v2 support boost?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: 08 A/T element

Post by KTuner »

When we add support for an ECU it's support for factory options. These weren't forced induction from the factory.
78si
Posts: 6
Joined: Thu Aug 31, 2017 2:48 pm

Re: 08 A/T element

Post by 78si »

Any development for automatics? I’m ready to buy!
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: 08 A/T element

Post by KTuner »

There is base tuning support for PZD-A3x and PZD-A4x.
78si
Posts: 6
Joined: Thu Aug 31, 2017 2:48 pm

Re: 08 A/T element

Post by 78si »

Is the “base tuning support” enough to properly run a tsx k24a2?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: 08 A/T element

Post by KTuner »

Yes, you can tune for a K24 engine. You'll need to retain the factory intake or tune the MAF curve for any changes in order to get fueling right.
Post Reply

Return to “07-08 Element Specific”