07 accord CM5 tuning options

bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

07 accord CM5 tuning options

Post by bianyy »

Hi Ktuner:

I have a 07 CM5 accord with K24A8 in China market, I'm going to tune my engine with ktuner and do some engine upgrade as well.

If I'm going to put k20a head, forged pistions, superchargers, can I go with 06-07 ktuner on OEM ECU to make the most usage of the hardware?

Can I use K24A8 AT ECU and harness plus 06-07 accord ktuner with 07/08 JDM K24A(this should be same with K24A2) engine longblock? As I don't like to disassemble dash to pull out the harness.

If not, do I need to order a TSX04-06 ECU and harness? As I know TSX0708 ECU is quite expensive.

what about to buy a PRB ecu plus related ktuener on my accord then what is the best engine longblock for me?

Cheers!
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: 07 accord CM5 tuning options

Post by KTuner »

I don't know enough about your specific market to give you suggestions. I don't know what ECU you have either.

You can't use an 04-06 TSX ECU, as we mention on the site for the 04-06 TSX platform. They're not compatible.

A PRB won't run an Accord dashboard. Sorry I don't have more info for you.
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: 07 accord CM5 tuning options

Post by bianyy »

Hi Ktuner

You are so quick!!!

I'm quite sure my engine is K24A8 with AT tranny, the ecm part number is "37820-RAH-H58".

this should be same specific with American market execption emission settings.

I'm going to swap an RBB engine to my chassis with 6MT, what is the best ecm and correct ktuner model for me ? Can I use accord ecu plus ktuner to drive a tsx engine, or I have to buy a RBB ecu, harness and RBB fit ktuner?

Are ktuners only work with those ecm part numbers listed on your website?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: 07 accord CM5 tuning options

Post by KTuner »

You can use the 06-07 Accord DBW ECU or our TSX package to drive the TSX engine with KTuner.
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: 07 accord CM5 tuning options

Post by bianyy »

Can I use 0708 tsx manual ecu with ktuner to tune my 07 accord with the purpose to have reverse lock
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: 07 accord CM5 tuning options

Post by bianyy »

another question.can i modify my factory ecu by your end user hardware,I m an electronics engineer:))
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: 07 accord CM5 tuning options

Post by KTuner »

You can use an 06-07 Accord AT ECU to gain reverse lock output.

Some have sourced their own headers and managed their own installs. Some have not turned out quite so well.
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: 07 accord CM5 tuning options

Post by bianyy »

From my understand of your replies, if I order ktuner prepared 0607 accord AT ECU plus end user system, I will 100% have reverse lock to control tsx 6 mt tranny?

BTW,will this setup can still control an AT tranny?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: 07 accord CM5 tuning options

Post by KTuner »

You will have reverse lock with that ECU.

It can also be used for an AT Accord since it's an AT ECU.
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: 07 accord CM5 tuning options

Post by bianyy »

can i order from a ebay dealer , the seller name is turbogixxer2183?if yes do i need to leave any comment to them?
Post Reply

Return to “06-07 Accord Specific”