end user

Post Reply
lilb52x
Posts: 11
Joined: Wed Jan 29, 2014 9:29 pm

end user

Post by lilb52x »

Hi I am getting ready to buy this and when I got to check out and I added a ecu and I saw install Ktuner on supplied ecu is that the re flash? Also if I start messing with stuff and I don't like it could I go back original tune? Are there ways we can download a tune? IM pretty excited with this.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: end user

Post by KTuner »

Hi,

You should probably talk to that dealer to make sure you're getting exactly what you're looking for. Install KTuner on a supplied ECU sounds like you're supplying the ECU for install.

If you get an end user board you can change and save calibrations. Any of those can be uploaded at any time.
lilb52x
Posts: 11
Joined: Wed Jan 29, 2014 9:29 pm

Re: end user

Post by lilb52x »

Hi I just purchased the end user Friday but I didn't think about it until now I had to buy an 05 ecu with ktuner installed. Am I going to be able to just pull out the old ecu and plug the new one in upload a tune and disable immobilizer and il be okay correct?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: end user

Post by KTuner »

With a new ECU you'll have a flashing green immobilizer light unless you unplug the immobilizer from power or get your ECU sync'd to it.
Post Reply

Return to “03-05 Accord / Euro CL7 Specific”