TPS help
TPS help
So i decided to change my tps because once it got to 63% it would dropped to 0%. So simple diagnose tried another its was going up to 73% without dropping so i bought the an upgrade acuity hall efect tps installed it calibrated to 0.5v closed and around 4.6v. Now the ecu on ktuner at iddle it stays at 0% and WOT it only goes up to 82%. How can I get to reach at least 97%?
Re: TPS help
They don't read 97% from the factory. 82% is normal.
Re: TPS help
Ok thanks for the reply. On another quote is there any updates on the antilag feature for this application any time soon?