k24a2 into 2004 cl7 accord

Post Reply
sr20kid
Posts: 2
Joined: Tue Mar 17, 2015 4:21 am

k24a2 into 2004 cl7 accord

Post by sr20kid »

Hi guys, ive just recently been looking into swapping a 6 speed into my accord. my 280,000 mile trans is starting to give out and my 125,000 mile k24a4 burns a quart of oil or more every 3,000 miles. So here is my question, im finding a tsx swap would provide me with both a nice power increase and a answer to my trans problems, but what all is required to run your system. if I buy an 05 ecu (A/T or M/T) and have you guys daughter board it will that come with the basemap I need? Will I need to run dual ecus? is there anything else that needs wired in for this to work? Im finding very little support for my questions and it seems you guys are the only ones who can even provide a map for a k24a2 in a cl7 accord. Hope to hear from you soon thanks in advance.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: k24a2 into 2004 cl7 accord

Post by KTuner »

You want an AT ECU to control the reverse lockout (Which you'll need to wire) for the 6 spd. You can definitely have it tuned for the engine you're swapping in, but we don't have a map included at this time.
sr20kid
Posts: 2
Joined: Tue Mar 17, 2015 4:21 am

Re: k24a2 into 2004 cl7 accord

Post by sr20kid »

So this is just a plug and play ecu correct? However you guys have no k24a2 base maps? So I would have to have a local tuner make me a base map? Or one of your dealers specifically? I'm just trying to figure out if this is the best management system for my swap you guys are the only ones I can find any information on as far as this swap goes.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: k24a2 into 2004 cl7 accord

Post by KTuner »

Some of our dealers have already done this if you want a recommendation. Email.
Post Reply

Return to “03-05 Accord / Euro CL7 Specific”