Low boost levels after reflash
Posted: Tue Mar 20, 2018 6:39 pm
Hello all,
I am now on the progress of a tune with Vittuned and I purchased a Ktuner V2 for this purpose. On the way of the calibration progress, Vittuned informed me about that I am not flashing the calibrations they've sent to me properly since we really do not see a boost any more than 7psi. This is not a datalog error, I observe the turbo boost gauge on the trip computer and they're right, the boost is low.
What I do is, I use the open tune option on Ktuner software, select the calibration file they sent to me and then use the upload base code option to upload the calibration onto the unit, then I go to the car and flash it. Can you please help me about what I am doing wrong? I made two unlisted short youtube vids for that. I am pretty sure that I am doing something wrong in the process of uploading the calibration onto the device. Because, I am flashing the factory tune onto the ECU exactly the same way as I do in the 2nd video and it just works fine. However, I cannot get those VitTuned calibrations right.
https://youtu.be/zDOW2aLsM5s
https://youtu.be/y_7jYA_9TaU
Thank you very much in advance.
I am now on the progress of a tune with Vittuned and I purchased a Ktuner V2 for this purpose. On the way of the calibration progress, Vittuned informed me about that I am not flashing the calibrations they've sent to me properly since we really do not see a boost any more than 7psi. This is not a datalog error, I observe the turbo boost gauge on the trip computer and they're right, the boost is low.
What I do is, I use the open tune option on Ktuner software, select the calibration file they sent to me and then use the upload base code option to upload the calibration onto the unit, then I go to the car and flash it. Can you please help me about what I am doing wrong? I made two unlisted short youtube vids for that. I am pretty sure that I am doing something wrong in the process of uploading the calibration onto the device. Because, I am flashing the factory tune onto the ECU exactly the same way as I do in the 2nd video and it just works fine. However, I cannot get those VitTuned calibrations right.
https://youtu.be/zDOW2aLsM5s
https://youtu.be/y_7jYA_9TaU
Thank you very much in advance.