Can I use V2 on 2003 Accord? (SOLVED)

Questions about your KTunerFlash V2 Hardware
Post Reply
Teedohs
Posts: 16
Joined: Sat Aug 07, 2021 11:16 am

Can I use V2 on 2003 Accord? (SOLVED)

Post by Teedohs »

Hello Members,

I currently have a 2003 Accord and using KTuner R1 Unit in the ECU. I've been looking into adding the TunerView app to an Android device and an easier way for data logging. Not to mention, I also purchased the standalone Bluetooth unit I need to solder into the KTuner PCB to get TunerView functionality on my Android device.

Before I venture that route, I would like to know if V2 will work with my vehicle and ECU. I see the site says it's not vehicle dependent but other info points that for my car, I can only use the R1 unit, which is what I've been using for a bit.

So, can I use the V2 device by plugging it directly to the USB cable that CES out of my ECU/KTuner PCB?
Last edited by Teedohs on Tue Oct 05, 2021 7:38 pm, edited 1 time in total.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Can I use V2 on 2003 Accord?

Post by KTuner »

The application page for 03-05 Accord states KTunerFlash units aren't compatible.
Teedohs
Posts: 16
Joined: Sat Aug 07, 2021 11:16 am

Re: Can I use V2 on 2003 Accord?

Post by Teedohs »

Ok, thanks for the clarification!
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Can I use V2 on 2003 Accord? (SOLVED)

Post by KTuner »

No problem
Post Reply

Return to “KTunerFlash V2 Specific”