BOGGING

[brybryx562]

06 type s
PWJDM power chamber
DC race header
toda cat back
I purchased the end user and loaded the reflash #2 (I/H/E). with vtec set at 4000 per the flash the car falls on its face at the 4000 RPM crossover until it reaches about 5800 RPM then really pulls hard. i raised the crossover to 5K and the car still hesitates at 4000 till i hit around the same 5800-6000 range.

[KTuner]

Send me your calibration via email.

[brybryx562]

how do i do that? i just used the "pre loaded cal" for I/H/E

[KTuner]

OK, send an email and I'll send the IHE modified.

[brybryx562]

car works a little better. im thinking the cheap ass dc header might be a bottle neck because my afr goes down to 10.8 at wot

[KTuner]

Even after the modified file? Whoa!

[brybryx562]

yeah thats what i said, i have a shorty intake im gonna try instead of that password intake. see if it changes at all

[daje00]

Any update on this ?

[Turbogixxer]

The reflash #2 was with a PLM header. DC sport may give you problems. You would want to tune the car.

[twojzgte]

I seem to be having the same issue. Car runs great, new plugs, coil packs are fine etc. it's just really sluggish down low and a little after the crossover and then it just wakes up out of no where.