Speed Density

Speed Density

Postby Steven Hung » Wed Feb 22, 2017 10:36 pm

This past weekend I convert to speed density. I tapped into position 1 and 2 in the MAF sensor/IAT sensor 5P connector for an IAT sensor. Temperature reading from the IAT sensor on KTuner is relatively consistence to the engine coolant temperature. My car runs fine with the tune from Turbogixxer. However there is a P0101 Mass Air Flow (MAF) Sensor Performance error code. “P0102 – Mass Sensor” from the KTuner disable/monitor screen is checked to disable the MAF sensor. Is there anything I need to do on the MAF sensor/IAT sensor 5P connector that can help to prevent the P0101 error code?
Steven Hung
 
Posts: 8
Joined: Fri Dec 26, 2014 1:41 pm

Re: Speed Density

Postby KTuner » Thu Feb 23, 2017 2:12 pm

Email us.
KTuner
Site Admin
 
Posts: 934
Joined: Mon Jul 22, 2013 8:13 pm


Return to 09-10 Fit

Who is online

Users browsing this forum: No registered users and 1 guest

cron