Page 1 of 2

base maps

Posted: Sun Jun 10, 2018 3:37 am
by EAFOURLIFE
will there be any new/ updated base maps released for this platform? example would be set ups with different intakes, like ktuned, prl, aquity etc. or a "stage 2" tune for cars with a downpipe. or is this considered a dead platform as the 10th gen civics are the latest thing.
just curious because i purchased the ktuner over flashpro as a cheaper alternative because with my ktuned intake i was throwing lean codes and after the tune 1 map provided it then threw rich codes and has slight driveability problems of it surging at moderate throttle input and dont have money or the time to get a road tune or dyno tune. i was very dissapointed to find that there wasnt more base maps.

also what would the harm be if i ran the speed density without further tuning to disable the maf sensor all together. what tables would require adjustment to make the car run smoothly on that?

Re: base maps

Posted: Mon Jun 11, 2018 12:44 pm
by KTuner
Not one intake manufacturer designed an intake that works with the factory MAF system. We have no plans to create basemaps for all of the various intakes out there. You can use speed density and work with a tuner. I'd suggest Derek at Innovative Motorworks or Kenny at TurbogixxerTuning.com

You may need to adjust fueling as necessary, depending on your mods.

Re: base maps

Posted: Sat Jul 07, 2018 3:37 am
by coryisaac16
were i can get the civic si 2012 base map

Re: base maps

Posted: Mon Jul 09, 2018 3:37 pm
by KTuner
File>New Tune

Re: base maps

Posted: Thu Nov 01, 2018 11:28 pm
by rynoryt
For the ECU ...M020M1 no have BaseMAP, impossible to tune. Have update or download for this? ;)

Re: base maps

Posted: Mon Nov 05, 2018 4:51 pm
by KTuner
That's not listed as a supported ECU.

Re: base maps

Posted: Tue Nov 06, 2018 12:41 pm
by rynoryt
Okay, but we have Brazilian companies doing REFLASH on this ECU.

And is there no support for whoever wants to have the device?
Because depending on a single company to make minor adjustments or even upgrades, it becomes abusive.

Re: base maps

Posted: Tue Nov 06, 2018 8:43 pm
by KTuner
We do not have this listed on our website as a supported ECU for our end user product.

Re: base maps

Posted: Thu Apr 04, 2019 12:32 pm
by pascon
For the ECU part number 37820-RX0-M02 works?

Re: base maps

Posted: Thu Apr 04, 2019 12:42 pm
by KTuner
pascon wrote:For the ECU part number 37820-RX0-M02 works?
This is not listed as supported on the website application page for the vehicle.