K-Tuner, but I can't connect anything. I was able to connect for the first three times and reflash, but suddenly I couldn't connect. I did recover ecu and reinstalled the software, but the communication failure pop-up appears no matter how many times I do it. Is it faulty? Is there a solution?
The url of the video
https://youtu.be/UuXb4bzU-fM
KTuner In-ECU communication failure
Re: KTuner In-ECU communication failure
Power down fully and check the LED status. Contact support via email for anything further.
Re: KTuner In-ECU communication failure
LED status is Red1 steady,Green4 blinking slowly.
Car:2005y Honda Accord Euro-R CL7
ECU:K-Tuner Complete Engine Management System (w/ Refurbished ECU) - Honda Accord CL7 (Incl. Euro-R) by H-TUNE
37820-RAD
https://h-tune.co.uk/k-tuner-complete-e ... o-r-cable/
Car:2005y Honda Accord Euro-R CL7
ECU:K-Tuner Complete Engine Management System (w/ Refurbished ECU) - Honda Accord CL7 (Incl. Euro-R) by H-TUNE
37820-RAD
https://h-tune.co.uk/k-tuner-complete-e ... o-r-cable/
Re: KTuner In-ECU communication failure
We outline what the LEDs mean in the help.
See http://ktuner.com/KTunerHelp/hardware_status_leds.htm
See http://ktuner.com/KTunerHelp/hardware_status_leds.htm
Re: KTuner In-ECU communication failure
I know that. I want to know how to recover from there.KTuner wrote:We outline what the LEDs mean in the help.
See http://ktuner.com/KTunerHelp/hardware_status_leds.htm
Re: KTuner In-ECU communication failure
That means it's not communicating with the ECU either because of the installation or ECU itself.