Page 1 of 1

2006 - Boost Capability?

Posted: Thu Jul 05, 2018 12:49 am
by Jasonvictory86
I've got the 2006 6MT with the '07 AT ECU.

I'm going to turbo the car (hopefully) this fall and I wanted to see if my V2 is capable of tuning boost?

I see there's a "boost table" button in the software but it doesn't do anything.

There's 10 columns on my table. Would I end up reducing the number of mBar columns (to lets say 5) and change over the remaining columns to PSI values? Or can more columns be added?

My plan is not going above 5 psi so I don't think I'll need a new MAP sensor but I may be wrong.

Thanks!
- Jason

Re: 2006 - Boost Capability?

Posted: Thu Jul 05, 2018 1:33 am
by Jasonvictory86
Image

Finally got around to putting on the Ktuner sticker.

Re: 2006 - Boost Capability?

Posted: Thu Jul 05, 2018 6:04 pm
by KTuner
We would need to expand the maps to add this support, but if you are willing to help test we are willing to make that happen.

Re: 2006 - Boost Capability?

Posted: Fri Jul 06, 2018 2:35 am
by Jasonvictory86
I would LOVE to be your guinea pig and lab rat for this!

I'm going to be doing this project in my spare time. Hopefully pulling the motor in August (which is probably a bad idea here in Texas).

Do you want me to email you externally?

- Jason

Re: 2006 - Boost Capability?

Posted: Fri Jul 06, 2018 2:36 pm
by KTuner
Yes, give me full specs and plans. We'll get it worked out!

Re: 2006 - Boost Capability?

Posted: Sat Jul 07, 2018 3:30 am
by Jasonvictory86
Email sent!