2006 - Boost Capability?
Posted: Thu Jul 05, 2018 12:49 am
I've got the 2006 6MT with the '07 AT ECU.
I'm going to turbo the car (hopefully) this fall and I wanted to see if my V2 is capable of tuning boost?
I see there's a "boost table" button in the software but it doesn't do anything.
There's 10 columns on my table. Would I end up reducing the number of mBar columns (to lets say 5) and change over the remaining columns to PSI values? Or can more columns be added?
My plan is not going above 5 psi so I don't think I'll need a new MAP sensor but I may be wrong.
Thanks!
- Jason
I'm going to turbo the car (hopefully) this fall and I wanted to see if my V2 is capable of tuning boost?
I see there's a "boost table" button in the software but it doesn't do anything.
There's 10 columns on my table. Would I end up reducing the number of mBar columns (to lets say 5) and change over the remaining columns to PSI values? Or can more columns be added?
My plan is not going above 5 psi so I don't think I'll need a new MAP sensor but I may be wrong.
Thanks!
- Jason