2006 - Boost Capability?

Post Reply
Jasonvictory86
Posts: 39
Joined: Tue Sep 05, 2017 4:20 pm
Location: Dallas, Texas

2006 - Boost Capability?

Post by Jasonvictory86 »

I've got the 2006 6MT with the '07 AT ECU.

I'm going to turbo the car (hopefully) this fall and I wanted to see if my V2 is capable of tuning boost?

I see there's a "boost table" button in the software but it doesn't do anything.

There's 10 columns on my table. Would I end up reducing the number of mBar columns (to lets say 5) and change over the remaining columns to PSI values? Or can more columns be added?

My plan is not going above 5 psi so I don't think I'll need a new MAP sensor but I may be wrong.

Thanks!
- Jason
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Jasonvictory86
Posts: 39
Joined: Tue Sep 05, 2017 4:20 pm
Location: Dallas, Texas

Re: 2006 - Boost Capability?

Post by Jasonvictory86 »

Image

Finally got around to putting on the Ktuner sticker.
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: 2006 - Boost Capability?

Post by KTuner »

We would need to expand the maps to add this support, but if you are willing to help test we are willing to make that happen.
Jasonvictory86
Posts: 39
Joined: Tue Sep 05, 2017 4:20 pm
Location: Dallas, Texas

Re: 2006 - Boost Capability?

Post by Jasonvictory86 »

I would LOVE to be your guinea pig and lab rat for this!

I'm going to be doing this project in my spare time. Hopefully pulling the motor in August (which is probably a bad idea here in Texas).

Do you want me to email you externally?

- Jason
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: 2006 - Boost Capability?

Post by KTuner »

Yes, give me full specs and plans. We'll get it worked out!
Jasonvictory86
Posts: 39
Joined: Tue Sep 05, 2017 4:20 pm
Location: Dallas, Texas

Re: 2006 - Boost Capability?

Post by Jasonvictory86 »

Email sent!
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Post Reply

Return to “04-06 TSX / Euro CL9 Specific”