95 accord k24a2

Civic/Integra/etc with a K swap
Post Reply
mhawkinson15
Posts: 1
Joined: Sun Feb 17, 2019 4:46 am

95 accord k24a2

Post by mhawkinson15 »

Looking for answers before i start ordering the wrong parts.

Chassis: 95 accord dx
Engine: TSX k24a2


My plan is to do a k24a2 w/ the accord 5sp trans. I will be using a tuck harness and can have it pinned for what ecu i will be running. I am looking at doing the RAD (05 accord) ecu. I will be running DBC. BUT i want to use a TSX gauge cluster. I can wire the cluster up no problem, but my problem is i will eventually be going turbo so i need something tunable. the TSX cluster has to get its info from the ecu via canbus. my thoughts are that i can run a RAD ecu w/ ktuner and set the basemap as a k24a2, then when i get ready for boost, get it tuned. i just need to confirm that the RAD ecu will indeed send outputs via canbus for the gauges to work. can anybody confirm this? Thanks in advance, just trying to figure out what to buy.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: 95 accord k24a2

Post by KTuner »

If properly wired the cluster will function.
Post Reply

Return to “K Swapped Vehicles”