k24a2 in ek civic no start issue

Civic/Integra/etc with a K swap
Post Reply
mccarleyjm
Posts: 1
Joined: Sun Oct 14, 2018 7:14 pm

k24a2 in ek civic no start issue

Post by mccarleyjm »

I have a k24a2 swapped into a civic ek. I have the rsx base ecu with the ktuner end user board. I had a no start issue when I loaded the basetune for the usdm 04-06 TSX but when i switched to the 03-05 accord basetune it started up I believe it could be because i have the accord cable throttle body and the basetune for the tsx was setup for dbw. could that cause this issue and is it possible to modify the TSX basetune to work with a cable throttle body?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: k24a2 in ek civic no start issue

Post by KTuner »

You need a cable throttle codebase in order to use a cable throttle ECU and engine setup. The PRB codebase has a tune for TSX.
Post Reply

Return to “K Swapped Vehicles”