O2 Sensor Confusion
Posted: Mon Apr 16, 2018 1:34 pm
Hi! I'm a new Ktuner user and new to the Honda crowd in general so please excuse my ignorance. I'm running a 2008 TSX engine with a 03-05 Accord RAD ECU and Hybrid Racing conversion harness connected to an 03-06 Element engine harness. The only engine mods are 50 degree VTC gear, Skunk2 intake and cable throttle body.
I'm confused as to what O2 sensor to run. Hybrid says 03-04 RSX-S - I have this one but it eventually stays in open loop due to a P1157 code. Another source says I need to run an O2 from an 03-06 Element because that's what my engine harness is from. If it helps, the sensor signal wires are tied to A28 and A31 pins on the ECU connector.
Do I need to run a 05-06 RSX sensor? Will a TSX sensor work? I have TSX and I can swap the plug to match the harness, it would save me $150.
Thanks!
I'm confused as to what O2 sensor to run. Hybrid says 03-04 RSX-S - I have this one but it eventually stays in open loop due to a P1157 code. Another source says I need to run an O2 from an 03-06 Element because that's what my engine harness is from. If it helps, the sensor signal wires are tied to A28 and A31 pins on the ECU connector.
Do I need to run a 05-06 RSX sensor? Will a TSX sensor work? I have TSX and I can swap the plug to match the harness, it would save me $150.
Thanks!