So im having issues getting my cam angles to save.
Ive entered all my high and low cam values but on the datalog it shows my actual and command cam angles show zero.
Im not sure what im doing wrong here
1996 civic cam angles
Re: 1996 civic cam angles
Have you flashed the ECU with your final tune? If you have no mechanical issues and VTC is enabled it will follow your commanded angles.
-
- Posts: 7
- Joined: Fri May 27, 2016 10:01 pm
Re: 1996 civic cam angles
Yes i changed all my cam angles. Then saved my tune and uploaded it.
I have no mechanical issues that im aware of. how do you enable vtc? Shouldn't it always been enabled on a tune built from a base map for a vehicle that comes with VTC?
I have no mechanical issues that im aware of. how do you enable vtc? Shouldn't it always been enabled on a tune built from a base map for a vehicle that comes with VTC?
Re: 1996 civic cam angles
Unless you disabled it, correct.
Send the tune and datalogs to the support email on our contact page.
Send the tune and datalogs to the support email on our contact page.
-
- Posts: 7
- Joined: Fri May 27, 2016 10:01 pm
Re: 1996 civic cam angles
Email with attached tune and datalog sent thanks