1996 civic cam angles

Civic/Integra/etc with a K swap
Post Reply
Bigwhite2009
Posts: 7
Joined: Fri May 27, 2016 10:01 pm

1996 civic cam angles

Post by Bigwhite2009 »

So im having issues getting my cam angles to save.
Ive entered all my high and low cam values but on the datalog it shows my actual and command cam angles show zero.
Im not sure what im doing wrong here
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: 1996 civic cam angles

Post by KTuner »

Have you flashed the ECU with your final tune? If you have no mechanical issues and VTC is enabled it will follow your commanded angles.
Bigwhite2009
Posts: 7
Joined: Fri May 27, 2016 10:01 pm

Re: 1996 civic cam angles

Post by Bigwhite2009 »

Yes i changed all my cam angles. Then saved my tune and uploaded it.
I have no mechanical issues that im aware of. how do you enable vtc? Shouldn't it always been enabled on a tune built from a base map for a vehicle that comes with VTC?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: 1996 civic cam angles

Post by KTuner »

Unless you disabled it, correct.

Send the tune and datalogs to the support email on our contact page.
Bigwhite2009
Posts: 7
Joined: Fri May 27, 2016 10:01 pm

Re: 1996 civic cam angles

Post by Bigwhite2009 »

Email with attached tune and datalog sent thanks
Post Reply

Return to “K Swapped Vehicles”