eg kswap ktuner

Civic/Integra/etc with a K swap
Axix23
Posts: 16
Joined: Wed Apr 16, 2014 10:51 am

Re: eg kswap ktuner

Post by Axix23 »

Are you using a z1 harness as well?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: eg kswap ktuner

Post by KTuner »

Yes, it's a real part number they are shipping.

Mention the harness type to them when you talk to them.
Axix23
Posts: 16
Joined: Wed Apr 16, 2014 10:51 am

Re: eg kswap ktuner

Post by Axix23 »

Okay, thanks. I just don't didn't see it on their online store.

So, your are also using a z1 engine harness?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: eg kswap ktuner

Post by KTuner »

Element. Just mention to them that you are. That's all that matters.
Axix23
Posts: 16
Joined: Wed Apr 16, 2014 10:51 am

Re: eg kswap ktuner

Post by Axix23 »

Okay, thanks. Called them today and ordered a conv harness for the z1 harness/ecu. Thanks again for your help again. I will be bugging you more when I install k tuner on my vehicle
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: eg kswap ktuner

Post by KTuner »

No problem. :)
Axix23
Posts: 16
Joined: Wed Apr 16, 2014 10:51 am

Re: eg kswap ktuner

Post by Axix23 »

just do double check. If I am running 05-06 tranny, 05-06 harness, 05-06 ecu with k-tuner. Do I need a hybrid/k-tuned Vss converter to get the speedo to work properly? I been hearing alot of different things. Or do I just run a wire from e26 to the speedo wire and it will read the speedo correctly?

is the hybrid/k-tuned vss converter geared towards people running a 02-04 ecu with their 05-06 tranny?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: eg kswap ktuner

Post by KTuner »

E26 will output speed signal.

I can't answer for them.
Axix23
Posts: 16
Joined: Wed Apr 16, 2014 10:51 am

Re: eg kswap ktuner

Post by Axix23 »

KTuner wrote:E26 will output speed signal.

I can't answer for them.
Is this info I am thinking correct?
"The vss converter just converts the 05-06 tranny high frequency to the 02-04 low frequency to work with the 02-04 ecu.
My question is, since I am running the 05-06 ecu, I am assuming the vss is not needed then?

B/c on their website, it says when using the 02-04 ecu with a 05-06 tranny. It says nothing about using a 05-06 ecu.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: eg kswap ktuner

Post by KTuner »

If you want their reasoning you'll need to call them directly.

We went over this on the phone and my answer is still the same. E26 outputs vss for the cluster.
Post Reply

Return to “K Swapped Vehicles”