KTuner.com

Gathering parts at the moment before I buy my Ktuner unit. The FAQ section states that a harness from a 03 Element will work. Is there any difference between the Element and Accord harnesses? I would think they would be the same, yeah?

Close. Accord does not have MIL output wire and adds wires for CAN.

Gotcha. Thanks for the fast response.

One more question. Does it matter if it's auto, manual, fwd, awd? Either will work?

If you don't want the extra wires and plugs get an MT. AWD is not relevant.

Got another question, but didn't want to start a new thread. Are all conversion harnesses compatible with Ktuner? I'm K swapping an EF. I know wireworx makes one specifically for Ktuner, but their site doesn't give an option for the EF chassis.

You'll need to email them directly. I'm not affiliated in any way and have heard no feedback about their product.

Contacted Wireworx, and they do offer a Ktuner conversion harness for the EF chassis, it's just not listed on the site. And it just so happened to be on sale at the moment! Thanks again for the fast response!

That is awesome. If you have success let me know so I can let others who ask know about this harness as well.

I hate to bring this thread back from the dead, but it’s where this should be asked. I’m in the hunt for a proper harness for my 06 K24a2 with matching tsx 6spd tranny going into my eg, ktuner site says I should use an 05-06 rsx harness, can this harness be from a RSX base and does AT or MT matter as well?