P0341 Code Disable

Civic/Integra/etc with a K swap
Post Reply
cm1872
Posts: 17
Joined: Wed Jul 17, 2019 9:42 pm

P0341 Code Disable

Post by cm1872 »

Hello there!
Is there any way to disable the "P0341 - Camshaft Position Sensor Circuit Range/Performance" code with ktuner in-ecu board on a k-series engine?
Everything is correct regarding the timing - timing chain - tensioner - vtc valve and sprocket. This happened after i swapped the stock cams on a k24 with k20a2 cams. This error wont let the ecu engage vtec and locks vtc at 0 degrees..
Thank you!
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: P0341 Code Disable

Post by KTuner »

These types of codes shouldn't be disabled. They're there to tell you that something is wrong. You do have the option of disabling VTC to see if it prevents this code, but you have a mechanical or wiring issue to fix.
Post Reply

Return to “K Swapped Vehicles”