Page 2 of 2
Re: VSS in 1985 Toyota Pickup
Posted: Sat Nov 14, 2015 9:51 pm
by KTuner
The ECU just needs a signal on the NC input of connector A. As I mentioned as long as it can see anything from your converter box you should be able to adjust it in the software to get a usable value. If you're not AT the AT input doesn't matter because you won't be using an AT codebase or controlling an AT trans.
Re: VSS in 1985 Toyota Pickup
Posted: Sun Nov 15, 2015 9:39 pm
by RABOOST
If you by any chance need a TSX engine wiring harness I have a BRAND NEW OEM TSX Auto harness never been used, PM me thanks
Re: VSS in 1985 Toyota Pickup
Posted: Tue Dec 15, 2015 5:07 pm
by poopoo
Thanks Admin, knowing the connector and pin is helpful. I should have known the other speed sensor was not needed because it goes to connector D, but just wanted to make sure.
Thank you for the offer RABOOST. I found a TSX harness on ebay a while back for $25, so I was all over that deal. Now I have a mostly complete harness in addition to the mangled one that came from the junkyard engine. Now I should be able to cobble something together.
Re: VSS in 1985 Toyota Pickup
Posted: Tue Dec 15, 2015 5:09 pm
by KTuner
Excellent.