VSS in 1985 Toyota Pickup

Civic/Integra/etc with a K swap
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: VSS in 1985 Toyota Pickup

Post by KTuner »

The ECU just needs a signal on the NC input of connector A. As I mentioned as long as it can see anything from your converter box you should be able to adjust it in the software to get a usable value. If you're not AT the AT input doesn't matter because you won't be using an AT codebase or controlling an AT trans.
RABOOST
Posts: 71
Joined: Sun Oct 25, 2015 5:10 pm

Re: VSS in 1985 Toyota Pickup

Post by RABOOST »

If you by any chance need a TSX engine wiring harness I have a BRAND NEW OEM TSX Auto harness never been used, PM me thanks
poopoo
Posts: 11
Joined: Thu Nov 12, 2015 1:49 am

Re: VSS in 1985 Toyota Pickup

Post by poopoo »

Thanks Admin, knowing the connector and pin is helpful. I should have known the other speed sensor was not needed because it goes to connector D, but just wanted to make sure.

Thank you for the offer RABOOST. I found a TSX harness on ebay a while back for $25, so I was all over that deal. Now I have a mostly complete harness in addition to the mangled one that came from the junkyard engine. Now I should be able to cobble something together.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: VSS in 1985 Toyota Pickup

Post by KTuner »

Excellent.
Post Reply

Return to “K Swapped Vehicles”