End user stock k20z3 basemap?

Civic/Integra/etc with a K swap
Post Reply
Darb432
Posts: 6
Joined: Wed Jun 26, 2019 12:30 am

End user stock k20z3 basemap?

Post by Darb432 »

I am using a 2008 k20z3 engine running intake/header/exhaust featuring a 72mm throttle body. I am curious if Ktuner has any basemaps established for guys running the z3. From what ive read cams are different moreover than anything else.

I just want this thing started and timed well enough to take to a tuner and have him work it. Dont plan to drive anyplace. Any input appreciated. Thanks in advance
Darb432
Posts: 6
Joined: Wed Jun 26, 2019 12:30 am

Re: End user stock k20z3 basemap?

Post by Darb432 »

The evap crap is deleted, i have a cable actuated throttle body. Stock cams presently... have tsx cams i plan to run eventually. The engine is 87mm pistons... slight overbore
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: End user stock k20z3 basemap?

Post by KTuner »

You're doing something custom which would require custom tuning.
Darb432
Posts: 6
Joined: Wed Jun 26, 2019 12:30 am

Re: End user stock k20z3 basemap?

Post by Darb432 »

I guess a better question is. Does ktuner offer a basemap for a stock k20z3 in swap form using a throttle body of stock bore size of 70mm?

If not i see a market for that granted many swaps are k20z3 in stock form with dbw throttle body swapped for the ever popular 70mm cable actuated.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: End user stock k20z3 basemap?

Post by KTuner »

That's something custom you'll need a custom tune for.
Post Reply

Return to “K Swapped Vehicles”