Help !

Civic/Integra/etc with a K swap
Post Reply
k20ef_
Posts: 9
Joined: Mon May 25, 2015 9:27 pm

Help !

Post by k20ef_ »

Ok so Ive loaded a basemap noticed I had a check engine light with 2 codes

P0108
P0122

I've already bought a brand new map sensor .

Funny thing is when I dont even have the tps plugged in it read 17%

Map sensor reads 686 -how do I change this to vac even with plugged in or not

I'm stumped ive tooken my whole day of roasting in the son to try and figure it out at this point Im wondering if I can get refunded my money if I'm not happy with this product .cause it's been two week of me messing with the ecu after I had a incident with a shortage cause connector e wasn't labled .
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Help !

Post by KTuner »

We don't make the harness, but it's a straight through harness. You plug in E and where E came in it goes out on the other side as well. Straight through. If you have an issue with their manufacturing of that aftermarket harness please take it up with them directly.

As far as your codes you probably have the MAP and TPS sensors swapped somehow or have other wiring issues related to it such as grounding. None of this is related to KTuner specifically, but you're welcome to talk to the dealer you purchased from for further assistance.
Post Reply

Return to “K Swapped Vehicles”