diagnose VSA fault

Ask your general questions about KTuner
Post Reply
mcdee735
Posts: 1
Joined: Tue Dec 11, 2018 6:46 am

diagnose VSA fault

Post by mcdee735 »

Hi, I purchased a 2018 civic SI salvaged 700 miles, It has VSA lite on ( I think from low brake pedal line that was replaced, needs more brake bleeding) and code P2565 Turbo cntrl sensor A circuit high, likely because the turbo is turned off from the VSA limiting the power with low poping noise thru exhaust from waste gate constantly opened. Can the kturner v2 diagnose the VSA faul error and then reflash the ECU to get my turbo back on?
thanks dave mcdee735
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: diagnose VSA fault

Post by KTuner »

2565 is the wastegate controller specifically. VSA will not cause this error.
Post Reply

Return to “General Questions”