Rev limit and Vtec engagement
-
- Posts: 3
- Joined: Wed Aug 22, 2018 2:55 pm
Rev limit and Vtec engagement
03 Rsx hits a “rev limit” around 6k rpm. I’m running reflash #2 with stock parameters so I can’t put a finger on why it won’t rev past 6k under load. All settings are exactly how they came except disabling the immobilizer. Stock ecu still hits vtec and flashing/ changing every parameter in the software is excellent with no errors.
-
- Posts: 3
- Joined: Wed Aug 22, 2018 2:55 pm
Re: Rev limit and Vtec engagement
03 rsx type s
Re: Rev limit and Vtec engagement
Sounds like it's breaking up, rather than a rev limit, unless you have low rev limit set to 6000 and you aren't seeing vehicle speed in the software. Perhaps you didn't enable 02-04 Transmission checkbox?
-
- Posts: 3
- Joined: Wed Aug 22, 2018 2:55 pm
Re: Rev limit and Vtec engagement
Thanks for the response. After I posted I found that setting and fixed the problem. It really scared me haha but we’re all good now.
Re: Rev limit and Vtec engagement
Good news there! No problem.