Page 1 of 1

Rev limit and Vtec engagement

Posted: Wed Aug 22, 2018 3:02 pm
by Delmecodavis
03 Rsx hits a “rev limit” around 6k rpm. I’m running reflash #2 with stock parameters so I can’t put a finger on why it won’t rev past 6k under load. All settings are exactly how they came except disabling the immobilizer. Stock ecu still hits vtec and flashing/ changing every parameter in the software is excellent with no errors.

Re: Rev limit and Vtec engagement

Posted: Wed Aug 22, 2018 3:02 pm
by Delmecodavis
03 rsx type s

Re: Rev limit and Vtec engagement

Posted: Wed Aug 22, 2018 6:31 pm
by KTuner
Sounds like it's breaking up, rather than a rev limit, unless you have low rev limit set to 6000 and you aren't seeing vehicle speed in the software. Perhaps you didn't enable 02-04 Transmission checkbox?

Re: Rev limit and Vtec engagement

Posted: Wed Aug 22, 2018 8:42 pm
by Delmecodavis
Thanks for the response. After I posted I found that setting and fixed the problem. It really scared me haha but we’re all good now.

Re: Rev limit and Vtec engagement

Posted: Wed Aug 22, 2018 8:43 pm
by KTuner
Good news there! No problem.