Rev limit and Vtec engagement

Ask your general questions about KTuner

Rev limit and Vtec engagement

Postby Delmecodavis » Wed Aug 22, 2018 3:02 pm

03 Rsx hits a “rev limit” around 6k rpm. I’m running reflash #2 with stock parameters so I can’t put a finger on why it won’t rev past 6k under load. All settings are exactly how they came except disabling the immobilizer. Stock ecu still hits vtec and flashing/ changing every parameter in the software is excellent with no errors.
Delmecodavis
 
Posts: 3
Joined: Wed Aug 22, 2018 2:55 pm

Re: Rev limit and Vtec engagement

Postby Delmecodavis » Wed Aug 22, 2018 3:02 pm

03 rsx type s
Delmecodavis
 
Posts: 3
Joined: Wed Aug 22, 2018 2:55 pm

Re: Rev limit and Vtec engagement

Postby KTuner » Wed Aug 22, 2018 6:31 pm

Sounds like it's breaking up, rather than a rev limit, unless you have low rev limit set to 6000 and you aren't seeing vehicle speed in the software. Perhaps you didn't enable 02-04 Transmission checkbox?
KTuner
Site Admin
 
Posts: 1489
Joined: Mon Jul 22, 2013 8:13 pm

Re: Rev limit and Vtec engagement

Postby Delmecodavis » Wed Aug 22, 2018 8:42 pm

Thanks for the response. After I posted I found that setting and fixed the problem. It really scared me haha but we’re all good now.
Delmecodavis
 
Posts: 3
Joined: Wed Aug 22, 2018 2:55 pm

Re: Rev limit and Vtec engagement

Postby KTuner » Wed Aug 22, 2018 8:43 pm

Good news there! No problem.
KTuner
Site Admin
 
Posts: 1489
Joined: Mon Jul 22, 2013 8:13 pm


Return to General Questions

Who is online

Users browsing this forum: No registered users and 1 guest