Ktuner cycles between connected and disconnected

Ask your general questions about KTuner
Post Reply
asrautox
Posts: 2
Joined: Sun Aug 05, 2018 4:29 pm

Ktuner cycles between connected and disconnected

Post by asrautox »

I've got a Ktuner V1.2 and have successfully flashed the stage 2 file to my ECU (Honda Accord 2.0t 10at). When trying to go back and upload file changes to the car, the Ktuner now just cycles between connected and disconnected and will not allow me to upload a new file (upload bar not highlighted). I also am not able to activate any sort of logging parameters while driving. This is very frustrating.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner cycles between connected and disconnected

Post by KTuner »

If it's still plugged into the vehicle the unit does go to sleep without ECU activity. Plug it in fresh or key on so it wakes up. The LED indicates everything you need to know about the status. Contact support by email if you still can't figure it out.
asrautox
Posts: 2
Joined: Sun Aug 05, 2018 4:29 pm

Re: Ktuner cycles between connected and disconnected

Post by asrautox »

It's not going to sleep. It's never connecting. It says connected for a second then switches between connected and disconnected ad infinitum.. Doesn't matter if I've just plugged it in or not.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner cycles between connected and disconnected

Post by KTuner »

No mention of whether it's still plugged into the vehicle at that point or what the LED does. Feel free to reach out to support via email and include those details. Info@KTuner.com
Jraney0815
Posts: 5
Joined: Mon Aug 13, 2018 1:43 pm

Re: Ktuner cycles between connected and disconnected

Post by Jraney0815 »

Did your issue get fixed?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner cycles between connected and disconnected

Post by KTuner »

It was asleep.
Post Reply

Return to “General Questions”