KTuner options, K24A1 2005 CRV 5 speed manual DBW, PPA ECU
Posted: Sun Nov 12, 2017 6:02 am
Im in the process of building a turbo CRV [K24A1, 2005, 5 SPEED MANUAL, with DBW} PPA series ECU
All original, no engine or electronics swapped.
What are the solutions within KTuner products that I could use for my turbo build.
1. Does KTuner have something for PPA series ECU
2. Would any other KTuner ECU like the PRB,PND,PRA etc work out of the box without doing changes in wiring or ecu pinout
3. Im getting a good deal on a PRB KTuner. If I repin the CKP, TPS wires the right way and ditch my DBW to go cable throttle, would it work on my CRV K24A1.
Note , this K24A1 is an ivtec with only cam phasing and 3 or 4 valve operation. No high lift cam lobe for true VTEC ...
Hoping to get it to work with KTuner without changing the wiring loom or cyl head etc. Let me know what you guys think.
Thanks in advance
Joe
All original, no engine or electronics swapped.
What are the solutions within KTuner products that I could use for my turbo build.
1. Does KTuner have something for PPA series ECU
2. Would any other KTuner ECU like the PRB,PND,PRA etc work out of the box without doing changes in wiring or ecu pinout
3. Im getting a good deal on a PRB KTuner. If I repin the CKP, TPS wires the right way and ditch my DBW to go cable throttle, would it work on my CRV K24A1.
Note , this K24A1 is an ivtec with only cam phasing and 3 or 4 valve operation. No high lift cam lobe for true VTEC ...
Hoping to get it to work with KTuner without changing the wiring loom or cyl head etc. Let me know what you guys think.
Thanks in advance
Joe