Page 1 of 1
Cam angle Vs. Cam angle 2
Posted: Mon Oct 16, 2017 4:50 pm
by SpookyScarySyphilis
Looking for some clarification, cam angle is intake cam angle, and cam angle 2 is the exhaust cam angle correct?
I will delete this thread after I get a response.
I drive an '09 accord i4
Re: Cam angle Vs. Cam angle 2
Posted: Mon Oct 16, 2017 7:49 pm
by KTuner
There should be CAM Actual and CAM Commanded. Not sure what you mean by CAM angle 2.
Re: Cam angle Vs. Cam angle 2
Posted: Tue Oct 17, 2017 3:16 am
by SpookyScarySyphilis
I meant in the tables, I recognise the cam actual vs cam commanded
What I'm describing is in this link:
https://imgur.com/N5OwHCh
Re: Cam angle Vs. Cam angle 2
Posted: Tue Oct 17, 2017 3:36 am
by KTuner
You only have Intake VTC. There's two separate sets of tables for it. Set both to the same. We'll likely consolidate into one when we finalize the forced induction support.
Re: Cam angle Vs. Cam angle 2
Posted: Tue Oct 17, 2017 1:11 pm
by SpookyScarySyphilis
Thank you very much!
Re: Cam angle Vs. Cam angle 2
Posted: Tue Oct 17, 2017 3:39 pm
by KTuner
No problem