K swap using element ecu and harness

Ask your general questions about KTuner
Post Reply
Orgnzm85
Posts: 13
Joined: Fri May 29, 2020 4:06 am

K swap using element ecu and harness

Post by Orgnzm85 »

hello all. Im new here and have a question. Motor is 05 k24a2 into a 00 civic. I have a ktuner element ecu and element harness. Do i have to swap all my sensors out to element sensors? And also if anyone knows how to repin for tps sensor. Tia!
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: K swap using element ecu and harness

Post by KTuner »

You would have to swap it from Drive By Wire to Drive By Cable in order to run the engine properly with a supported Element ECU.
Orgnzm85
Posts: 13
Joined: Fri May 29, 2020 4:06 am

Re: K swap using element ecu and harness

Post by Orgnzm85 »

That i know. I already have a skunk2 cable tb. But just wondering if all the sensors will work without having to swap them.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: K swap using element ecu and harness

Post by KTuner »

What I mentioned is all. If you're using an Element harness you're already pinned for standard TPS.
Orgnzm85
Posts: 13
Joined: Fri May 29, 2020 4:06 am

Re: K swap using element ecu and harness

Post by Orgnzm85 »

Reason i ask also is because when doing a k24a2 swap in an element everyone changes out their sensors to element sensors. Not sure what the reason is if youre saying i wouldnt need to. But i hope i dont have to.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: K swap using element ecu and harness

Post by KTuner »

Sounds like a lot of wasted time to me.
Orgnzm85
Posts: 13
Joined: Fri May 29, 2020 4:06 am

Re: K swap using element ecu and harness

Post by Orgnzm85 »

Would you happen to know anyone that tunes ktuner in the midsouth? Im in memphis, tn
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: K swap using element ecu and harness

Post by KTuner »

The only people who I can say for sure are those listed on the dealer page. If you want to try remote tuning, contact Derek at Innovative Motorworks.
Post Reply

Return to “General Questions”