Basic 2 step question

Ask your general questions about KTuner
Post Reply
Austindc5
Posts: 2
Joined: Wed Apr 08, 2020 9:20 pm

Basic 2 step question

Post by Austindc5 »

So I have a question regarding basic 2 step. I’m curious about the limit and restart values. If I want it to 2 step at 5500rpm, would i put the limit at 5500rpm and could I put restart at 5300 rpm or would it have to be the same value as the limit (5500rpm)?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Basic 2 step question

Post by KTuner »

You can put whatever you want and it will vary the rate at which you hit the cut / recover.
Austindc5
Posts: 2
Joined: Wed Apr 08, 2020 9:20 pm

Re: Basic 2 step question

Post by Austindc5 »

KTuner wrote:You can put whatever you want and it will vary the rate at which you hit the cut / recover.
Does the basic 2 step settings affect the behavior of adjustable 2 step if you have adjustable 2 step enabled?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Basic 2 step question

Post by KTuner »

Adjustable two step has its own settings if you choose it.
Post Reply

Return to “General Questions”