TPS readings

Trumpdis3
Posts: 16
Joined: Mon Jul 22, 2013 10:43 pm
Location: Chandler, Az
Contact:

TPS readings

Post by Trumpdis3 »

I've noticed on all my logs that the TPS reading never gets higher than 82.5%. Should I be seeing 100 at WOT? We adjusted it to get the idle back where it should be but that was before KTuner was installed. Idle is still fine . Anyone?
2006 RSX TYPE S
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: TPS readings

Post by KTuner »

~80 is normal. I'll likely have an option so you can set the spread and have it read 100 there.
daje00
Posts: 52
Joined: Tue Jul 23, 2013 11:36 am

Re: TPS readings

Post by daje00 »

Even on my stock RSX when i used my scan tool it never read 100% at wot, the most was 92.5%.
Garrett
Posts: 61
Joined: Tue Jul 23, 2013 4:21 pm

Re: TPS readings

Post by Garrett »

I test a fully stock RSX K20z1

the TPS closed is a 9%
TPS fully open is 93%
Ktuner Authorized Tuner
Precisionautocanada.com
Trumpdis3
Posts: 16
Joined: Mon Jul 22, 2013 10:43 pm
Location: Chandler, Az
Contact:

Re: TPS readings

Post by Trumpdis3 »

Garrett wrote:I test a fully stock RSX K20z1

the TPS closed is a 9%
TPS fully open is 93%

So key on , car not started .. 9% or are you talking at idle, car warmed up...
I had to drill out the stock "rivets" in order to adjust it. I just stopped when the idle was corrected. Before I did that it seemed to hunt for steady idle . Thanks for the replies...
2006 RSX TYPE S
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Trumpdis3
Posts: 16
Joined: Mon Jul 22, 2013 10:43 pm
Location: Chandler, Az
Contact:

Re: TPS readings

Post by Trumpdis3 »

KTuner wrote:~80 is normal. I'll likely have an option so you can set the spread and have it read 100 there.

Cool! Thanks...
2006 RSX TYPE S
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Trumpdis3
Posts: 16
Joined: Mon Jul 22, 2013 10:43 pm
Location: Chandler, Az
Contact:

Re: TPS readings

Post by Trumpdis3 »

Lol, gonna shorten up this SIG, scrolling forever on my iphone to read a damn post or reply....
2006 RSX TYPE S
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: TPS readings

Post by KTuner »

Garrett wrote:I test a fully stock RSX K20z1

the TPS closed is a 9%
TPS fully open is 93%
That will cause idle issues. It should be 0 or very close to 0 at close in the KTuner software.
Garrett
Posts: 61
Joined: Tue Jul 23, 2013 4:21 pm

Re: TPS readings

Post by Garrett »

KTuner wrote:
Garrett wrote:I test a fully stock RSX K20z1

the TPS closed is a 9%
TPS fully open is 93%
That will cause idle issues. It should be 0 or very close to 0 at close in the KTuner software.
so I need to move the TPS itseft since we don't have ajustement value in the software
Ktuner Authorized Tuner
Precisionautocanada.com
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: TPS readings

Post by KTuner »

Factory shouldn't need adjustment like that. I wonder what happened.
Post Reply

Return to “KTuner Software”