Just got ktuner installed today. Was wondering if there is a feature to make the mil flash on knock. And if so what the feature is called. I've looked and can't find anything
Thanks.
knock detection
Re: knock detection
Welcome. That's standard with the 05-06 ECUs.
Re: knock detection
Can you explain: knock limit and sensitivity
Re: knock detection
Knock limit, along with many other adjustments, will adjust the ignition values from the main ignition maps. With that in mind adjusting the knock limit to a higher value would add final timing, and so would adding to the main ignition maps.
Knock sensitivity is a threshold map for knock signal noise. The higher the value the higher the threshold and less sensitive it will be in that area.
Knock sensitivity is a threshold map for knock signal noise. The higher the value the higher the threshold and less sensitive it will be in that area.
Re: knock detection
What is the max value for knock sensitivity? ... 204?
Re: knock detection
Depends on the platform. Generally the highest value on the stock map, in the low load columns, is the highest that should be used.